Hello, welcome HongTelecom
Huawei Microwave IDU RTN 980L RTN980L

Huawei Microwave RTN 980L RTN980L CSHL CSHLU ISV3 ISM6 ISM8 ISU2 ISX2 SL1DA CQ1 EM6T EM6F EM6 EG4 EG4P EX1 EFP8 EMS6 ML1 MD1 SP3S SP3D AUX PIU FAN

Huawei Microwave RTN320 RTN 320

Huawei RTN 950A Microwave ISV3 ISX2 ISU2 CSHO RTN950A

Huawei RTN 980 Microwave CSHNU CSHNA CSHN Board RTN980

IDU ODU Antenna RTN360 Huawei RTN 360

OptiX RTN 380 Radio Transport System ODU IDU Antenna Huawei RTN 380 Price

SLC1SHXA2 SLC1SXA3 SHXA2 SXA3 Board Huawei RTN 310

Similar products:OptiX PMP 450,OptiX RTN 310,OptiX RTN 320,OptiX RTN 360,OptiX RTN 380,OptiX RTN 380e,OptiX RTN 905,OptiX RTN 905e,OptiX RTN 910,OptiX RTN 910A,OptiX RTN 950,OptiX RTN 950A,OptiX RTN 980,OptiX RTN 980L,RTN XMC,RTN380A,RTN380H,RTN510

Chassis Structure

The dimensions (H x W x D) of the IDU 980L chassis are 225 mm x 442 mm x 220 mm. The IDU 980L chassis has a air-cooled ten-layered structure.Figure 1 shows the chassis structure of the IDU 980L.Figure 1 Structure of the IDU 980L chassis

Figure 2 Slots of the IDU 980L

Installation Methods

The IDU 980L can be deployed in a variety of scenarios and on several different types of racks, cabinets, and surfaces.The IDU 980L can be installed:

  • In a 300 mm-deep European Telecommunications Standards Institute (ETSI) cabinet
  • In a 600 mm-deep ETSI cabinet
  • In a 450 mm-deep 19-inch cabinet
  • In a 600 mm-deep 19-inch cabinet
  • In a 19-inch open rack
  • In a wireless-equipment outdoor cabinet

When installed in an outdoor cabinet, an IDU 980L has a 30A power capacity, allowing up to 12 IF/RF directions to be configured, does not support hybrid configuration of ISM6 ,ISM8 and ISV3, and supports a maximum of six service boards in extended slots.When an IDU 980L is installed in an outdoor cabinet, its IF configurations vary depending on the models of system control, switching, and timing boards and IF boards. For details, see Table 1.

System Control, Switching, and Timing Board Frequency Band ISV3 ISM6/ISM8
CSHL 5 GHz 10
6/7/8/11 GHz 12 12
CSHLU 5 GHz 9
6/7/8/11 GHz 10 8

Air Duct

An IDU 980L chassis supports air cooling, with air inlet on the left side and air outlet on the right side.Figure 1 shows the air duct in an IDU 980L chassis.Figure 1 Air duct in an IDU 980L chassis

IDU Labels

Product nameplate labels, qualification card labels, ESD protection labels, grounding labels, laser safety class labels, high temperature warning labels, and operation warning labels, and other types of labels are attached to their respective positions on the IDU chassis or boards. Adhere to the warnings and instructions on the labels when performing various types of tasks, thereby avoiding bodily injuries or damage to the IDU.

Label Description

Table 1 provides the description of the labels on the IDU chassis and boards. Actual labels may vary depending on the configurations of the chassis and boards.

Label Label Name Description
ESD protection label Indicates that the equipment is sensitive to static electricity.
Grounding label Indicates the grounding position of the IDU chassis.
Fan warning label Warns you not to touch fan leaves when the fan is rotating.
High temperature warning label Indicates that the board surface temperature may exceed 70°C when the ambient temperature is higher than 55°C. In such a case, wear protective gloves to handle the board.
Power caution label Instructs you to read related instructions before performing any power-related tasks.
Qualification card label Indicates that the equipment has been quality checked.
RoHS label Indicates that the equipment complies with the related requirements specified in the RoHS directive.
Product nameplate label Indicates the product name and certification.
Operation warning label Instruct you to turn off the RFU-NonSD/RFU-SD/ ODU power switch before removing an IF cable.
Operation guidance label Instructs you to slightly pull the switch lever outwards before setting the switch to the "I" or "O" position.
Operation warning label Instructs you to disconnect the IF cable from the IDU before connecting the IF cable to the ODU.

Label Position

Figure 1 shows the positions of the labels on the IDU 980L chassis.Figure 1 Positions of the IDU 980L labels

Board List

The IDU 980L provides various functions with different boards inserted.Figure 1 IDU slot layout

 NOTE:

"EXT" represents an extended slot, which can house any type of IF board or interface board.

Board Acronym Board Name Valid Slot Required System Control Board Description
CSHL Hybrid system control, switching, and timing board Slot 15/20 Provides TDM cross-connections: 128x128 VC-4 higher-order cross-connections and lower-order cross-connections equivalent to 32x32 VC-4s.Provides a packet switching capacity of 43 Gbit/s.Performs system communication and control.Supports anti-Theft function.Supports the clock processing function, providing one external clock input/output port and two external time input/output ports. The first external time port uses the same physical connector as the external clock port.Provides one Ethernet NM port, one NM serial port, and one NM cascading port.Provide two STM-4 optical ports or two STM-1 optical/electrical ports equipped with SFP modules.Provides four GE ports, of which two can be GE electrical ports (RJ45) or GE optical ports (SFP), and the other two can be only GE electrical ports (RJ45).Provides a Type-A USB port that allows data to be backed up using a USB flash drive.Provides a Mini USB port for connecting a local maintenance terminal.Provides one Huawei outdoor cabinet monitoring port, which uses the same physical connector as the second external time port.Provides three-input and one-output external alarm ports.
CSHLU Hybrid system control, switching, and timing board Slot 15/20 Provides TDM cross-connections: 128x128 VC-4 higher-order cross-connections and lower-order cross-connections equivalent to 32x32 VC-4s.Provides a 120 Gbit/s packet switching capability.Performs system communication and control.Supports L3VPN.Supports anti-Theft function.Supports the clock processing function, providing one external clock input/output port and two external time input/output ports. The first external time port uses the same physical connector as the external clock port.Provides one Ethernet NM port, one NM serial port, and one NM cascade port.Provide two STM-4 optical ports or two STM-1 optical/electrical ports equipped with SFP modules.Provides one 10GE port, two GE ports, and two GE electrical ports.Provides a Type-A USB port that allows data to be backed up using a USB flash drive.Provides a Mini USB port for connecting a local maintenance terminal.Provides one Huawei outdoor cabinet monitoring port, which uses the same physical connector as the second external time port.Provides three-input and one-output external alarm ports.
ISV3 Versatile IF board Slots 1 to 14 CSHL/CSHLU Long haul Short haul
Provides one IF interface.Supports integrated IP microwave and SDH microwave. The supported service modes are Native E1+Ethernet, Native STM-1+Ethernet or SDH.Supports the XPIC function.Supports the AM function.Supports air-interface bandwidth acceleration (Ethernet frame header compression) and enhanced Ethernet frame compression (payload compression).Supports AES256-based encryption at air interfaces.Supports the PLA/EPLA function.Supports QPSK to 1024QAM modulation plus QPSK/16QAM strong FEC, and 512QAM light FEC.Supports anti-Theft function. Provides one IF interface.Supports integrated IP microwave and SDH microwave. The supported service modes are Native E1+Ethernet, Native STM-1+Ethernet or SDH.Supports the XPIC function.Supports the AM function.Supports air-interface bandwidth acceleration (Ethernet frame header compression) and enhanced Ethernet frame compression (payload compression).Supports AES256-based encryption at air interfaces.Supports the PLA/EPLA function.Supports QPSK to 2048QAM modulation plus QPSK/16QAM strong FEC, and 512QAM/1024QAM light FEC.NOTE:If AM is enabled, 2048QAM is supported.supports interconnected with OptiX RTN 905 (in modulation schemes from QPSK strong to 1024QAM light).Supports interconnection with ISU2/ISX2 boards (in modulation schemes of QPSK to 256QAM)Supports anti-Theft function.
ISM6 Two-channel universal IF board Slots 1 to 14 CSHL/CSHLU Long Haul (Split LH) Short Haul
Provides two IF ports.The two IF ports can be used together or independently.Supports QPSK to 1024QAM modulation and supports QPSK/16QAM strong FEC and 512QAM light FEC.Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode.Supports 1+1 protection for two intra- or inter-board IF channels.Supports XPIC for two IF channels on the board.Supports 1+1 protection for inter-board XPIC groups.Supports intra-board PLA.Supports EPLA.Supports AM.Supports Ethernet frame header compression.Reserves hardware ready for the MIMO function.Supports anti-Theft function. Provides two IF ports.The two IF ports can be used together or independently.Supports multiple IF running modes:IS6-PLUS: The highest-order modulation mode is 4096QAM. The maximum channel spacing is 112 MHz (in this case, the highest-order modulation mode is 2048QAM).IS6: The highest-order modulation mode is 4096QAM. The maximum channel spacing is 112 MHz (in this case, the highest-order modulation mode is 2048QAMM).IS3: The highest-order modulation mode is 2048QAM. When working in IS3 mode, ISM6 boards can interconnect with each other or RTN 905.IS2: The highest-order modulation mode is 256QAM. When working in IS2 mode, ISM6 boards can interconnect with ISU2/ISX2 boards.Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode.Supports 1+1 protection for two intra- or inter-board IF channels.Supports XPIC for two IF channels on the board.Supports 1+1 protection for inter-board XPIC groups.Supports intra-board PLA.Supports EPLA.Supports AM.Supports Ethernet frame header compression.Reserves hardware ready for the multiple-input multiple-output (MIMO) function.Supports anti-Theft function.
ISM8 Dual-channel versatile universal IF board Slots 1-14 CSHL/CSHLU Long haul (only for split products) Short haul
Provides two IF ports.Supports the QPSK-2048QAM modulation scheme, QPSK/16QAM Strong FEC, and 512QAM Light FEC.Supports integrated IP microwave and SDH microwave, and can work in the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode.Supports 1+1 protection for the two IF channels in intra-board or inter-board scenarios.Supports XPIC for the two IF channels in the intra-board scenario.Supports 1+1 XPIC workgroup protection with two boards.Supports the intra-board PLA function.Supports the EPLA function.Supports the AM function.Supports Ethernet frame header compression.Provides hardware ready for MIMO. Provides two IF ports. The two IF ports can be used together or independently.Supports long-haul microwave transmission only in split LH microwave mode. When working with RFUs to provide long-haul microwave transmission, supports QPSK to 2048QAM modulation and supports QPSK/16QAM strong FEC and 512QAM Light FEC.When working with ODUs to support short-haul microwave transmission, supports multiple IF running modes:IS8: The highest-order modulation mode is 8192QAM. The maximum channel spacing is 112 MHz (in this case, the highest-order modulation mode is 4096QAM).IS6: The highest-order modulation mode is 4096QAM. The maximum channel spacing is 112 MHz (in this case, the highest-order modulation mode is 2048QAM).IS3: The highest-order modulation mode is 2048QAM. When working in IS3 mode, ISM6 boards can interconnect with ISV3 boards or RTN 905s.Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode.Supports 1+1 protection for two intra- or inter-board IF channels.Supports XPIC for two intra-board IF channels.Supports use of two boards to provide 1+1 protection for XPIC groups.Supports intra-board PLA.Supports EPLA.Supports AM.Reserves hardware ready for MIMO.
ISU2 Universal IF board Slots 1 to 14 CSHL/CSHLU Provides one IF port.Supports modulation schemes from QPSK to 256QAM.Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode.Supports the AM function.Supports Ethernet frame header compression.Supports the PLA/EPLA function.Supports short-haul microwave transmission.
ISX2 Universal XPIC IF board Slots 1 to 14 CSHL/CSHLU Provides one IF port.Supports modulation schemes from QPSK to 256QAM.Supports integrated IP microwave and SDH microwave using the Native E1+Ethernet, Native STM-1+Ethernet, or SDH service mode.Supports the XPIC function.Supports the AM function.Supports the AM booster function.Supports Ethernet frame header compression.Supports the PLA/EPLA function.Supports short-haul microwave transmission.
SL1DA 2xSTM-1 interface board Slots 1 to 6 CSHL/CSHLU Uses SFP modules to provide two STM-1 optical/electrical ports.Support K-byte transparent transmission.
CQ1 4-port channelized STM-1 interface board Slots 1 to 14 CSHL/CSHLU Uses the SFP optical modules to provide four channelized STM-1 optical/electrical ports.Supports CES E1 and ML-PPP E1 processing for E1s in STM-1 frames.Transmits overhead bytes over CES E1s.
EM6T 6-port RJ45 Ethernet/Gigabit Ethernet interface board Slots 1 to 14 CSHL Provides four FE electrical ports.Provides two GE electrical ports that are compatible with FE electrical ports.Supports synchronous Ethernet.
EM6F 4-port RJ45 + 2-port SFP Fast Ethernet/Gigabit Ethernet interface board Slots 1 to 14 CSHL Provides four FE electrical ports.Uses SFP modules to provide two GE/FE optical ports or GE electrical ports. The GE electrical ports are compatible with the FE electrical ports.Supports synchronous Ethernet.
EM6 4-port RJ45/SFP + 2-port RJ45 Fast Ethernet/Gigabit Ethernet interface board Slots 1 to 14 CSHL/CSHLU Provides four GE ports and two FE electrical ports, of which the GE ports can be RJ45 GE electrical ports or SFP GE optical ports. The GE electrical ports are compatible with the FE electrical ports.Supports synchronous Ethernet.Supports the IEEE 1588v2 and ITU-T G.8275.1.
EG4 2-port RJ45/SFP + 2-port RJ45 Gigabit Ethernet interface board Slots 1 to 14 CSHL/CSHLU Provides four GE ports, of which two can be RJ45 GE electrical ports or SFP GE optical ports and the other two can only be RJ45 GE electrical ports. The GE electrical ports are compatible with the FE electrical ports.Supports synchronous Ethernet.Supports the IEEE 1588v2 and ITU-T G.8275.1.Supports anti-Theft function.
EG4P 2-port RJ45/SFP + 2-port RJ45 Gigabit Ethernet interface board, providing the power supply function Slots 1 to 14 CSHL/CSHLU Provides four GE ports, of which two can be RJ45 GE electrical ports or SFP GE optical ports and the other two can only be RJ45 GE electrical ports supporting the power over Ethernet function. The GE electrical ports are compatible with the FE electrical ports.Supports synchronous Ethernet.Supports the IEEE 1588v2 and ITU-T G.8275.1.Supports anti-Theft function.NOTE:If an EG4P board powers an RTN 980L through PoE, carefully plan the power consumption within the allowed range. For details, contact Huawei.
EX1 1x10GE interface board Slots 1 and 2 CSHL/CSHLU Uses XFP modules to provide one 10GE port.Supports synchronous Ethernet.Supports IEEE 1588v2 and ITU-T G.8275.1.
EFP8 8-port RJ45 FE EoPDH processing board, providing the switching function Slots 1 to 14 CSHL Provides eight FE electrical ports.Bridges to the packet plane through one internal GE port.Processes EoPDH services. The total VCG bandwidth is 63xE1.Supports transparently transmitted services and L2 switched services.Supports synchronous Ethernet.
EMS6 4-port RJ45 and 2-port SFP FE/GE EoSDH processing board, providing the switching function Slots 1 to 6 CSHL Provides four FE electrical ports.Uses SFP modules to provide two GE optical ports or GE electrical ports. The GE electrical ports are compatible with the FE electrical ports.Bridges to the packet plane through one internal GE port.Processes EoSDH services. The total VCG bandwidth is 622 Mbit/s.Supports transparently transmitted Ethernet services and L2 switched services.Supports synchronous Ethernet.
ML1 16xE1 (Smart) tributary board Slots 1 to 14 CSHL/CSHLU Provides sixteen 75-ohm or 120-ohm Smart E1 ports.Supports CES E1, ATM/IMA E1, ML-PPP E1, and Fractional E1 functions.
MD1 32xE1 (Smart) tributary board Slots 1 to 14 CSHL/CSHLU Provides thirty-two 75-ohm or 120-ohm Smart E1 ports.Supports CES E1, ATM/IMA E1, ML-PPP E1, and Fractional E1 functions.
SP3S 16xE1 tributary board Slots 1 to 14 CSHL/CSHLU Provides sixteen 75-ohm or 120-ohm TDM E1 ports.
SP3D 32xE1 tributary board Slots 1 to 14 CSHL/CSHLU Provides thirty-two 75-ohm or 120-ohm TDM E1 ports.
AUX Auxiliary interface board Slots 1 to 14 CSHL Provides one orderwire port, one asynchronous data port, one synchronous data port, and four-input and two-output external alarm ports.
PIU Power board Slot 26/27 CSHL/CSHLU Provides
FAN Fan board Slot 28 CSHL/CSHLU Air-cools the IDU.

About Us

As a world leading Huawei networking products supplier, Hong Telecom Equipment Service LTD(HongTelecom) keeps regular stock of Huawei router and switch and all cards at very good price, also HongTelecom ship to worldwide with very fast delivery.

For related articles, visit the HongTelecom Blog and HongTelecom WordPress.
For real pictures of related product, visit the HongTelecom Gallery.
To buy related product, visit the HongTelecom Online Shop.

Close Menu
×
×

Cart