Hello, welcome HongTelecom
Server E9000 Network Interface Cards MZ220 &MZ310 NIC

Server E9000 S1010CUT Network Interface Cards models :
03021SMF IT1DMGEA0100 MZ110-4 * GE port buckle card, PCIE 2.0 X4
03022DAX IT11MGEB MZ111, 2 * (2 * GE) port card, PCIE 2.0 X2
03021SMG IT1DMXEC0100 MZ510-2 * 10G port CNA daughter board, PCIE 2.0 X8
03022ATY IT11MXEF MZ512-4 * 10G port CNA daughter board, PCIE 2.0 X8
03022BWD IT11MXEG MZ311, 4 * 10G pinch, PCIE 3.0 X8
03022BYY IT11MXIA MZ610-2 * 40G port HCA buckle card, PCIE 3.0 X8
03021VNH IT11MFIA MZ611-2 * 56G port HCA card, PCIE 3.0 X8
03022DHB IT11MFIB MZ612, 2 * 56G IB FDR daughter board, PCIE 3.0 X8
03022KFT IT11MXIB MZ613, 2 * 40G QDR daughter board, PCIE 3.0 X8
03021SHM IT1DMXEA0000 MZ910-2 * 10GE, 2 * 8G FC port button card, PCIE 3.0 X8
E9000 _-半宽
The MZ220 is a Fibre Channel (FC) host bus adapter (HBA). It is used for E9000 compute nodes and provides two 16G FC ports for compute nodes to connect to switch modules in the chassis.
The MZ220 uses the Emulex XE201 chip, and its two 16G FC ports support 16G/8G auto-negotiation. The MZ220 supports FC network applications and provides high-bandwidth, high-performance storage network solutions.
The MZ220 can be installed in slot Mezzanine1 (Mezz1 for short) or Mezzanine2 (Mezz2 for short) on a half-width E9000 compute node or in slot Mezz1, Mezz2, Mezzanine3 (Mezz3 for short), or Mezzanine4 (Mezz4 for short) on a full-width E9000 compute node.
The MZ220 provides network ports for connecting to switch modules:
*  When the MZ220 is installed in slot Mezz1 or Mezz3, its two ports connect to switch modules in slots 2X and 3X.
*  When the MZ220 is installed in slot Mezz2 or Mezz4, its two ports connect to switch modules in slots 1E and 4E.
Figure 1 MZ220 appearance
en-us_image_0010104028
Figure 2 MZ220 installation positions on a half-width compute node
en-us_image_0007459483
 
Figure 3 MZ220 installation positions on a full-width compute node
en-us_image_0010104029
 
The MZ310 is an Ethernet network interface card (NIC). It is used for E9000 compute nodes and provides two 10GE ports for compute nodes to connect to switch modules in the chassis.
The MZ310 uses the Intel 82599 chip and supports NIC applications.
The MZ310 can be installed in slot Mezzanine1 (Mezz1 for short) or Mezzanine2 (Mezz2 for short) on a half-width compute node or in slot Mezz1, Mezz2, Mezzanine3 (Mezz3 for short), or Mezzanine4 (Mezz4 for short) on a full-width compute node.
The MZ310 provides network ports for connecting to switch modules:
*  When the MZ310 is installed in slot Mezz1 or Mezz3, its two 10GE ports connect to switch modules in slots 2X and 3X.
*  When the MZ310 is installed in slot Mezz2 or Mezz4, its two 10GE ports connect to switch modules in slots 1E and 4E.
Figure 4 MZ310 appearance
en-us_image_0010196812
Figure 5 MZ310 installation positions on a half-width compute node
en-us_image_0009943137
Figure 6 MZ310 installation positions on a full-width compute node
en-us_image_0009943141
E9000 _空框

Leave a Reply

Close Menu
×
×

Cart