Hello, welcome HongTelecom
Huawei server E9000 Network Interface Cards MZ110 &MZ111 NIC

S1010CUT Network Interface Cards models :
03021SMF IT1DMGEA0100 MZ110-4 * GE port buckle card, PCIE 2.0 X4
03022DAX IT11MGEB MZ111, 2 * (2 * GE) port card, PCIE 2.0 X2
03021SMG IT1DMXEC0100 MZ510-2 * 10G port CNA daughter board, PCIE 2.0 X8
03022ATY IT11MXEF MZ512-4 * 10G port CNA daughter board, PCIE 2.0 X8
03022BWD IT11MXEG MZ311, 4 * 10G pinch, PCIE 3.0 X8
03022BYY IT11MXIA MZ610-2 * 40G port HCA buckle card, PCIE 3.0 X8
03021VNH IT11MFIA MZ611-2 * 56G port HCA card, PCIE 3.0 X8
03022DHB IT11MFIB MZ612, 2 * 56G IB FDR daughter board, PCIE 3.0 X8
03022KFT IT11MXIB MZ613, 2 * 40G QDR daughter board, PCIE 3.0 X8
03021SHM IT1DMXEA0000 MZ910-2 * 10GE, 2 * 8G FC port button card, PCIE 3.0 X8
E9000 _后视图-LIUA
MZ110 NIC
The MZ110 is an Ethernet NIC. It is used for E9000 compute nodes and provides four GE ports for compute nodes to connect to switch modules in the chassis.
The MZ110 uses the Broadcom BCM5719 chip and supports NIC applications.
The MZ110 can be installed in slot Mezzanine1 (Mezz1 for short) or Mezzanine2 (Mezz2 for short) on a half-width E9000 compute node or in slot Mezz1, Mezz2, Mezzanine3 (Mezz3 for short), or Mezzanine4 (Mezz4 for short) on a full-width E9000 compute node.
The MZ110 provides network ports for connecting to switch modules:
* When the MZ110 is installed in slot Mezz1 or Mezz3, its four GE ports connect to switch modules in slots 2X and 3X.
* When the MZ110 is installed in slot Mezz2 or Mezz4, its four GE ports connect to switch modules in slots 1E and 4E.
Figure 1 MZ110 appearance
en-us_image_0007156745
Figure 2 MZ110 installation positions on a half-width compute node
en-us_image_0007342739
Figure 3 MZ110 installation positions on a full-width compute node
en-us_image_0007342740
 
MZ111 NIC
The MZ111 is an Ethernet NIC. It is used for E9000 compute nodes and provides four GE ports for compute nodes to connect to switch modules in the chassis.
The MZ111 uses the Broadcom BCM5720 chip and supports NIC applications.
The MZ111 can be installed in slot Mezzanine1 (Mezz1 for short) or Mezzanine2 (Mezz2 for short) on a half-width E9000 compute node.
The MZ111 provides network ports for connecting to switch modules:
* When the MZ111 is installed in slot Mezz1, its four GE ports connect to switch modules in slots 2X and 3X.
* When the MZ111 is installed in slot Mezz2, its four GE ports connect to switch modules in slots 1E and 4E.
Figure 4 MZ111 appearance
en-us_image_0007527646
Figure 5 MZ111 installation positions on a half-width compute node
en-us_image_0007459421
Figure 6 MZ111 installation positions on a full-width compute node
en-us_image_0007459423

Leave a Reply

Close Menu
×
×

Cart