Hello, welcome HongTelecom
OceanStor 5600 V3 & 5800 V3 3U Indicator Introduction

After a controller enclosure is powered on, you can check the current operating status of the controller enclosure by viewing its indicators.
Indicators on the Front Panel
1 Indicators on the front panel of a controller enclosure
fig_i_v2r1_3u_controller_front

1 Running/Alarm indicator on a BBU 2 Location indicator on the controller enclosure
3 Alarm indicator on the controller enclosure 4 Power indicator/Power button on the
controller enclosure
5 Running/Alarm indicator of the fan module 6 Controller power indicator
7 Controller alarm indicator

Indicators on the front panel of a controller enclosure

Module No. Indicator Status and Description
BBU 1 Running/Alarm
indicator on a BBU
Steady green: The BBU is fully charged.
Blinking green (1 Hz): The BBU is being charged.
Blinking green (4 Hz): The BBU is being discharged.
Steady red: The BBU is faulty.
System
subrack
2 Location indicator on
the controller
enclosure
Blinking blue: The controller enclosure is being
located.
Off: The controller enclosure is not located.
3 Alarm indicator on the
controller enclosure
Steady red: An alarm about the controller enclosure
is generated.
Off: The controller enclosure is working properly.
4 Power indicator/
Power button on the
controller enclosure
Steady green: The controller enclosure is powered on.
Blinking green (0.5 Hz): The controller enclosure is
powered on for a short time.
Blinking green (1 Hz): The controller enclosure is
in the burn-in test.
Blinking green (2 Hz): The controller enclosure is
in the operating system boot process or in the
power-off process.
Off: The controller enclosure is powered off or
powered by BBUs.
Controller 5 Running/Alarm
indicator of the fan
module
Steady green: Fan modules are working correctly.
Steady red: The fan module is faulty.
Off: Fan modules are powered off.
6 Controller power
indicator
Steady green: The controller is powered on.
Blinking green (0.5 Hz): The controller is powered
on and in the BIOS boot process.
Blinking green (2 Hz): The controller is in the
operating system boot process.
Off: The controller cannot be detected or is
powered off.
7 Controller alarm
indicator
Steady red: An alarm about the controller is
generated.
Off: The controller is working correctly.

Indicators on the Rear Panel
2 Indicators on the rear panel of a controller enclosure
fig_i_v2r1_3u_controller_rear_f

1 Running/Alarm indicator on a power module 2 Power indicator on a management module
3 Speed indicator of the management
network port
4 Link/Active indicator of the management
network port
5 Power indicator/Hot Swap button on an
interface module
6 Speed indicator of a GE electrical port
7 Link/Active indicator of a GE electrical port 8 Speed indicator of a GE electrical port
9 Link/Active indicator of a GE electrical port 10 Link/Speed indicator of a 10 Gbit/s
FCoE port
11 Link/Speed indicator of a 16 Gbit/s Fibre
Channel port
12 Link/Speed indicator of an 8 Gbit/s Fibre
Channel port
13 Indicator of the mini SAS HD expansion port

Indicators on the rear panel of a controller enclosure

Module No. Indicator Status and Description
Power
module
1 Running/Alarm
indicator on a power
module
Steady green: The power supply is normal.
Blinking green: The power input is normal but
the device is powered off.
Steady red: The power module is faulty.
Off: No external power input is available.
Management
module
2 Power indicator on a
management module
Steady green: The module is working correctly.
Blinking green: The module receives a
hot swap request.
Steady red: The module is faulty.
Off: The module is powered off or hot swappable.
3 Speed indicator of the
management
network port
Steady orange: Data is being transferred at
the highest rate.
Off: The data transfer speed is lower than the
highest speed.
4 Link/Active indicator
of the management
network port
Steady green: The port is connected properly.
Blinking green: Data is being transferred.
Off: The port is connected abnormally.
Interface
module
5 Power indicator/
Hot Swap button on
an interface module
Steady green: The interface module is
working correctly.
Blinking green: The interface module receives a
hot swap request.
Steady red: The interface module is faulty.
Off: The interface module is powered off or
can be hot-swappable.
6 Speed indicator of a
GE electrical port
Steady orange: The data transfer rate between
the controller enclosure and the application server
is 1 Gbit/s.
Off: The data transfer rate between the controller
enclosure and the application server is lower than
1 Gbit/s.
7 Link/Active indicator
of a GE electrical port
Steady green: The connection between the
controller enclosure and the application server
is correct.
Blinking green: Data is being transferred.
Off: The connection between the controller
enclosure and the application server is incorrect.
8 Speed indicator of a
10GE electrical port
Steady orange: The data transfer rate between
the controller enclosure and the application server
is 10 Gbit/s.
Off: The data transfer rate between the controller
enclosure and the application server is lower than
10 Gbit/s.
9 Link/Active indicator of
a 10GE electrical port
Steady green: The connection between the
controller enclosure and the application server
is correct.
Blinking green: Data is being transferred.
Off: The connection between the controller
enclosure and the application server is incorrect.
10 Link/Speed indicator
of a 10 Gbit/s
FCoE port
Steady blue: The data transfer rate between the
storage system and the application server is
10 Gbit/s.
Blinking blue: Data is being transferred.
Steady red: The port is faulty.
Off: The link to the port is down.
11 Link/Speed indicator
of a 16 Gbit/s Fibre
Channel port
Steady blue: The data transfer rate between the
storage system and the application server is 16 Gbit/s.
Blinking blue: Data is being transferred.
Steady green: The data transfer rate between the
storage system and the application server is
4 Gbit/s or 8 Gbit/s.
Blinking green: Data is being transferred.
Steady red: The port is faulty.
Off: The link to the port is down.
12 Link/Speed indicator
of an 8 Gbit/s Fibre
Channel port
Steady blue: The data transfer rate is 8 Gbit/s.
Blinking blue: Data is being transferred.
Steady green: The data transfer rate is 2 Gbit/s
or 4 Gbit/s.
Blinking green: Data is being transferred.
Steady red: The port is faulty.
Off: The link to the port is down.
13 Indicator of the mini
SAS HD expansion
port
Steady blue: Data is transferred to the downstream
disk enclosure at the rate of 4 x 12 Gbit/s.
Blinking blue: Data is being transferred to the
downstream disk enclosure at the rate of
4 x 12 Gbit/s.
Steady green: Data is transferred to the
downstream disk enclosure at the rate of
4 x 3 Gbit/s or 4 x 6 Gbit/s.
Blinking green: Data is being transferred to the
downstream disk enclosure at the rate of
4 x 3 Gbit/s or 4 x 6 Gbit/s.
Steady red: The port is faulty.
Off: The link to the port is down.

OceanStor5600V3
Hong Telecom Equipment Service Ltd Provide below accessories for huawei OceanStor 5800 V3
LIC-5800V3-SNAP 88032KMY OceanStor 5800 V3 : Snapshot license
LIC-5800V3-COPY 88032KNA OceanStor 5800 V3 : LUN copy license
LIC-5800V3-CLON 88032KNB OceanStor 5800 V3 : Cloning license
LIC-5800V3-REP 88032KNC OceanStor 5800 V3 : Remote Copy Licenses
LIC-5800V3-TIER 88032KNE OceanStor 5800 V3 : Intelligent data classification
LIC-5800V3-QOS 88032KNG OceanStor 5800 V3 : Intelligent Service Quality Control
LIC-5800V3-PAR 88032KNH OceanStor 5800 V3 : Intelligent cache partition
LIC-5800V3-PATH 88032KNK OceanStor 5800 V3 : OceanStor Huawei multi-path software license
LIC-5800V3-BS 88032NMQ OceanStor 5800 V3 : Block Foundation Package Authorization (including Device Management, SmartThin, SmartMulti-tenant, SmartMigration, SmartErase, SmartMotion, Cloud Service)
LIC-5800V3-BR 88032NXT OceanStor 5800 V3 : System Reporting Software License
LIC-5800V3-MIR 88032QAP OceanStor 5800 V3 : Volume mirroring license
LIC-5800V3-CACH 88032RGT OceanStor 5800 V3 : Smart SSD cache
LIC-5800V3-WORM 88032RGU OceanStor 5800 V3 : WORM license
LIC-5800V3-CD 88032RGW OceanStor 5800 V3 : Smart Data Compression (for LUNs)
LIC-58-UPGRADE 88032UCX OceanStor 5800 V3 : Block Storage Upgrade Unified Storage Foundation Package Authorization with SmartDedupe & SmartCompression (for FS), SmartQuota, NFS, CIFS, NDMP)
LIC-58-HYPERPAK 88032UDC OceanStor 5800 V3 : Data Protection Software Suite Licensing (including HyperSnap, HyperCopy, HyperClone, HyperMirror)
LIC-58-SMARTPAK 88032UDG OceanStor 5800 V3 : Efficiency Enhancement Software Suite License (with SmartTier, SmartCache)
LIC-58V3-METRO 88032WXL OceanStor 5800 V3 : Array Dual Live License
LIC-58V3-VAULT 88032XMB OceanStor 5800 V3 : Integrated backup license
LIC-58V3-ACCPAK 88033NGF OceanStor 5800 V3 : Performance Accelerator Suite licenses (including SmartTier, SmartCache, SmartQos, SmartPartition)
LIC-58V3-DRPAK 88033NGG OceanStor 5800 V3 : Disaster Recovery Solution Suite License (including HyperSnap, HyperReplication)
LIC-58V3-METPAK 88033NGH OceanStor 5800 V3 : Dual Live Solution Suite License (including HyperMetro, HyperSnap)
LIC-58V3-VIRPAK 88033NGJ OceanStor 5800 V3 : Consolidated Migration Solution Suite Licenses (including 2 * SmartVirtualization, HyperMirror, SmartMigration)

Leave a Reply

Close Menu
×
×

Cart